網站導覽  
美國WPI產品
 
放大器與靜電計
 
刺激器與隔離器
 
動物生理學
 
生物傳感器
 
細胞與組織研究
 
數據採集系統
 
手術與顯微解剖工具
 
氣體麻醉機、電刀、燒灼儀
 
玻璃毛細管
 
顯微操作儀
 
顯微鏡與攝影器材
 
微鍛儀與拉針器
 
幫浦與顯微注射器材
 
實驗室耗材
 
 

 ■ PERIPRO-4H 
Peri-Star Pro 4-channel, High Rate Pump
 

 

 
  • Fluid Flow Range: 0.8-280 mL/min: #17 tubing: 3.5-280 mL/min
  • Tubing Range: 3.1-6.4 mm ID
  • Rotor Speed Range: 1-100 rpm
  • 110/220V switchable

      

 
 
Accurate and precise pumping

Peri-Star Pro peristaltic pumps provide accurate and precise pumping with convenience and versatility. Peri-Star Pro can be run in either flow rate mode (mL/min) or rotation speed mode (rpm). For good laboratory practice, pumps must be calibrated after changing the tubing and solution. Users can easily calibrate Peri-Star Pro to deliver flow as accurate as 0.5% in a wide flow range from 0.01 mL/min to 280 mL/min. Under rotation speed mode, the digitally controlled stepping motor provides accurate and reproducible operation with 0.1% rpm both forward and in reverse.

Easy to use

Large backlit digital LCD display provides readouts of rotation direction, flow rate or rotation speed, tubing ID, drive status and remote control mode simultaneously. Water resistant membrane keypad allows easy programming while protecting LCD display and controls from fluid entry. Built-in Human Machine Interface (HMI) with screen instructions in plain English steps users through initial setup, calibration and operating procedures. The user-friendly interface reduces the need to frequently check the printed manual for instruction and reference.

Rollers

Peri-Star Pro is available in two versions: a 4-roller version for high flow and an 8-roller version for lower volumes while providing high pressure with minimal pulsations. A unique planetary gear design with eight actively driven rollers (four rollers for higher flow rate model), together with independent tubing compression fine adjustment, greatly increases flow accuracy and prolongs tubing life. Snap-on cartridges allow tubing to be changed quickly without cross contamination of solutions. 

Number of rollers 4
Number of channels 2-4
Rotor Speed Range 1-100 rpm
Fluid Flow range 0.8-280 mL/min, #17 Tubing: 3.5-280 mL/min
Tubing range 3.1-6.4 mm ID
Self-Calibration Yes
Working Environment 0-45°C, Humidity < 80%
Power 110V or 220V AC, 50 - 60 Hz
Dimensions 190 x 162 x 275 mm
Shipping weight 11 lb / 5 kg

 
 
 
關於太和實驗動物實驗儀器設備飼育管理儀器手術解剖器具美國WPI產品聯絡我們首頁