康寧96孔盤用電極(EVOM2跨膜電阻儀專用)
Manual Electrode for EVOM2, Use with Corning HTS 96-Well Plate
型號：STX100C96
Details
提升TEER測量精確度
STX100採用和STX2電極相同的可靠設計原理，並做數個重要的修改。電極尖端尺寸減少至1.5mm以便於通過HTS孔盤較窄的隙縫。STX100電極本身採用更強的材質，耐用度更高、最大化可應用範圍。電極底部形狀設計為可完全貼合『鑰匙孔』狀的過濾杯，此種設計讓STX100電極相較於STX2電極，TEER讀數的精度和再現性提升±5歐姆。可以直接在HTS孔盤置於一般或分開的托盤上進行測量，減少汙染可能性並減少對培養細胞的的機械損傷。
兼容以下Coring HTS孔盤：
Use in HTS
Increase accuracy of TEER measurements
STX100’s design is based on the same reliable design principle as the universally used STX2 electrode, with several important modifications. The size of the electrode tip has been reduced to 1.5 mm to facilitate positioning through the narrower slit of the HTS plate. The STX100 electrode itself is constructed using a stronger material for higher durability and maximum usage applications. The bottom section of the electrode is shaped to fit neatly into the “keyhole” shaped filter well. This enables the STX100 electrode to produce increased accuracy and reproducibility of TEER readings (±5 ohms) compared to the standard STX2. Measurement can be directly performed when the HTS plate is in either a common or divided tray, reducing the possibility of contamination as well as mechanical damage to the cultured cells.
This electrode is compatible with the following Corning plates:
