網站導覽  
美國WPI產品
 
放大器與靜電計
 
刺激器與隔離器
 
動物生理學
 
生物傳感器
 
細胞與組織研究
 
數據採集系統
 
手術與顯微解剖工具
 
氣體麻醉機、電刀、燒灼儀
 
玻璃毛細管
 
顯微操作儀
 
顯微鏡與攝影器材
 
微鍛儀與拉針器
 
幫浦與顯微注射器材
 
實驗室耗材
 
 

Two-Syringe Infusion Pump
 ▓SP200i
 Two-Syringe Infusion Pump
 
    • Accepts syringe sizes: 10uL - 140mL (two)
    • Minimum Flow Rate: 0.001 uL/hr
    • Maximum Flow Rate: 145 mL/min (140 mL syringe)
    • 95-135 V, 50 Hz

 



Sturdy, reliable, and easy to use

Sturdy and reliable, extremely simple to set up and use - and surprisingly affordable. Liquid crystal displays (LCDs) prompt you through set­up: First, select syringe from table stored in the pump\'s memory and displayed on the LCD. Next, enter the volume to be dispensed. Finally, enter the flow rate, press \"start.\" It\'s fast and simple. Your settings are permanently stored in memory - there\'s no need to re-enter them each day. SP pumps feature preset rate and volume control. Just set the volume you want dispensed. Volume is tracked continuously on the LCD display. Then, when the preset volume has been dispensed, the pump shuts off automatically. The easy-to-read digital display provides realtime readings using both parameters and values for clearer, mistake-free readings. The SP200 Series pumps offer TTL and RS-232C interfaces and automatic shutoff under stall conditions.

Features

This feature-laden two-syringe infusion pump combines a broad speed range and holds a wide range of syringe sizes to meet the requirements of virtually any laboratory application. Features include: holds two syringes, 10 to 140 mL, backlit LCD display, knob locks/unlocks drive block for effortless, drag-free adjustment, simple menu-driven setup: Syringe diameter (selected from displayed table), Dispense volume, Dispense flow rate, continuous dispense volume display, preset volume control and automatic shutoff, settings can be reviewed or changed during operation, optical encoder stall detection, choice of unit selection, last settings stored in permanent memory, built-in RS-232C interface for computer linking or \"daisy chaining\" up to 100 pumps, and TTL interface for foot switch, timer, relay control; outputs for run indicator, valve control.



Mode Infusion
Syringe Size 10 µL to 140 mL (two)
Maximum Flow Rate (140 mL syringe) 145 mL/min
Minimum Flow Rate 0.001µL/hr
Linear Force 40 Ib (18 kg)
Advance Per Microstep 0.165 micron
Maximum Step Rate 1600 steps/sec
Minimum Step Rate 1 step/100 sec
Accuracy < 1% error
Reproducibility ± 0.1%
Dimensions 11 x 9 x 5.5 in., 28 x 23 x 14 cm
Shipping Weight 12 Ib (5.4 kg)
Notes: Available 95-135 V or 220-240 V, 50/60 Hz

 
 
 
關於太和實驗動物實驗儀器設備飼育管理儀器手術解剖器具美國WPI產品聯絡我們首頁